Material & cut list
Every length, angle, and bend, straight from the drawing.
The design you drew is the cut list. Exact lengths to 1/16", miter angles, bend radius for arches, hardware counts, and a purchase summary rounded up for ordering.
What you get
A list the shop can cut from, not a list to check.
Every member, by group
Frame, rails, pickets, uprights, and posts, listed by material size with quantity and length for each piece.
Miter angles
Corner and rail joints carry their angle, so the saw is set right the first time.
Bend radius for arches
Single-arch and camelback designs list each curved tube with its chord length, arch height, and the radius to set on the bender.
Individual picket lengths
On arched and sloped designs, every picket segment is calculated separately to the nearest 1/16", so nothing gets cut short.
Hardware counts
Hinges, latches, wheel boxes, and fasteners tallied from the design, not from memory.
Purchase summary
Total linear feet per material size, rounded up to stock lengths, so you know exactly what to order.
Built for the bench
Arches and camelbacks are where most lists fall apart. This one doesn't.
Curved tops mean every picket is a different length and every curved tube needs a radius. The cut list works those out from the geometry of the drawing.
- Side arch and center arch segments on a camelback are listed separately, each with chord length and radius.
- Picket lengths on arched and sloped designs are calculated per picket, not averaged.
- Imperial or metric. Set your default once and every cut list, dimension, and download follows.
- Stock lengths and the purchase summary round up so the order covers the job.
How it works
Three steps from a drawing to the shop floor.
- 1
Design it
Draw the gate, fence, or handrail with Tig or by hand. The cut list follows the design automatically.
- 2
Open the cut list
One click from the designer. Change the picket spacing and the quantities and lengths change with it.
- 3
Print it or export it
PDF for the shop wall, Excel for the office. Or bundle it with the drawings and the estimate in one job package.
Generating and reviewing the cut list is part of every account. Exporting it is unlocked by ODP Full Access, and every new account starts with a 30-day free trial of full access, no credit card required. The priced version of the same list is the estimator.
Cut lists that come from the drawing.
Start a 30-day free trial of full access. No credit card required.
No credit card to start. No charge unless you choose a plan.